Code: Select all
[ 0.000000@0] Initializing cgroup subsys cpu
[ 0.000000@0] Initializing cgroup subsys cpuacct
[ 0.000000@0] Linux version 3.14.29-ge9eb190-dirty (wiatec@wiatecvm) (gcc version 4.9.2 20140904 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.09 - Linaro GCC 4.9-2014.09) ) #1 SMP PREEMPT Fri Sep 29 17:50:34 CST 2017
[ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
[ 0.000000@0] no prop version_code
[ 0.000000@0] bootconsole [earlycon0] enabled
[ 0.000000@0] fdt Reserved memory table:
[ 0.000000@0] linux,meson-fb: 0x000000003e000000 - 0x0000000040000000 (32 MiB)
[ 0.000000@0] linux,di: 0x000000003c200000 - 0x000000003e000000 (30 MiB)
[ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000003c200000, size 30 MiB
[ 0.000000@0] linux,ion-dev: 0x000000003a200000 - 0x000000003c200000 (32 MiB)
[ 0.000000@0] linux,ppmgr: 0x000000003a200000 - 0x000000003a200000 (0 MiB)
[ 0.000000@0] linux,codec_mm_cma: 0x0000000027c00000 - 0x0000000033c00000 (192 MiB)
[ 0.000000@0] linux,picdec: 0x000000003a200000 - 0x000000003a200000 (0 MiB)
[ 0.000000@0] Reserved memory: incorrect alignment of CMA region
[ 0.000000@0] linux,codec_mm_reserved: 0x0000000036100000 - 0x000000003a200000 (65 MiB)
[ 0.000000@0] fdt Reserved memory total: 354 MiB
[ 0.000000@0] cma: Reserved 8 MiB at 35800000
[ 0.000000@0] psci: probing function IDs from device-tree
[ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0360a7000 s19968 r8192 d20992 u49152
[ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 248468
[ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=disabled logo=osd1,loaded,0x3d800000,2160p60hz420 maxcpus=4 vout=2160p60hz420,enable hdmimode=2160p60hz420 cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic
[ 0.000000@0] logo: osd1
[ 0.000000@0] logo: loaded
[ 0.000000@0] logo: 0x3d800000
[ 0.000000@0] logo: 2160p60hz420
[ 0.000000@0] vout_serve: 2160p60hz420
[ 0.000000@0] vout_serve: enable: 1
[ 0.000000@0] logo: get hdmimode: 2160p60hz420
[ 0.000000@0] logo: get cvbsmode: 576cvbs
[ 0.000000@0] tv_vout: cvbs performance line = 0
[ 0.000000@0] jtag: jtag select 2
[ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000@0] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000@0] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000@0] Memory: 630700K/1011712K available (10620K kernel code, 1146K rwdata, 3884K rodata, 1263K init, 5868K bss, 381012K reserved)
[ 0.000000@0] Virtual kernel memory layout:
[ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
[ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8041180000 ( 17 MB)
[ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc03e000000 ( 992 MB)
[ 0.000000@0] .init : 0xffffffc001eac000 - 0xffffffc001fe7e00 ( 1264 kB)
[ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001eab334 ( 14509 kB)
[ 0.000000@0] .data : 0xffffffc001fe8000 - 0xffffffc0021068c0 ( 1147 kB)
[ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01eaafff]
[ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000@0] arch_multi_cluster:0
[ 0.000000@0] Preemptible hierarchical RCU implementation.
[ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
[ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
[ 0.008243@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
[ 0.016820@0] Console: colour dummy device 80x25
[ 0.021095@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.031670@0] pid_max: default: 32768 minimum: 301
[ 0.036567@0] Security Framework initialized
[ 0.040785@0] SELinux: Initializing.
[ 0.044545@0] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.051368@0] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.061166@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
[ 0.065758@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
[ 0.072712@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
[ 0.079722@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
[ 0.090095@0] Initializing cgroup subsys debug
[ 0.091175@0] Initializing cgroup subsys freezer
[ 0.095844@0] ftrace: allocating 36517 entries in 143 pages
[ 0.142326@0] /cpus/cpu@0: Missing clock-frequency property
[ 0.142369@0] /cpus/cpu@1: Missing clock-frequency property
[ 0.147952@0] /cpus/cpu@2: Missing clock-frequency property
[ 0.153581@0] /cpus/cpu@3: Missing clock-frequency property
[ 0.159153@0] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[ 0.209464@0] Meson chip version = RevA (21:A - 82:0)
[ 0.227867@1] CPU1: Booted secondary processor
[ 0.247852@2] CPU2: Booted secondary processor
[ 0.267863@3] CPU3: Booted secondary processor
[ 0.267945@0] Brought up 4 CPUs
[ 0.278914@0] SMP: Total of 4 processors activated.
[ 0.291612@0] sched: registering cpufreq notifiers for scale-invariant loads
[ 0.293141@0] instabooting: 0
[ 0.305822@0] pinctrl core: initialized pinctrl subsystem
[ 0.306571@0] regulator-dummy: no parameters
[ 0.310802@0] NET: Registered protocol family 16
[ 0.316308@0] ramoops: using module parameters
[ 0.319658@0] console [pstore-1] enabled
[ 0.323024@0] pstore: Registered ramoops as persistent store backend
[ 0.329383@0] ramoops: attached 0x100000@0x7300000, ecc: 0/0
[ 0.336008@0] cpuidle: using governor menu
[ 0.339471@0] aml_vdac_init: module init
[ 0.343291@0] register canvas platform driver
[ 0.347611@0] register rdma platform driver
[ 0.353165@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001ff0000
[ 0.358231@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.365473@0] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.372587@0] software IO TLB [mem 0x26800000-0x26c00000] (4MB) mapped at [ffffffc026800000-ffffffc026bfffff]
[ 0.381445@0] Serial: AMBA PL011 UART driver
[ 0.386343@0] aml_i2c version: 20140813
[ 0.389860@0] i2c-core: driver [pmu4] using legacy resume method
[ 0.395809@0] codec_mm:codec_mm_module_init
[ 0.400066@0] aml_watch_point_probe, in
[ 0.404053@0] gxbb_mpll_clk: register mpll_clk_out0 success done
[ 0.409730@0] gxbb_mpll_clk: register mpll_clk_out1 success done
[ 0.415747@0] gxbb_mpll_clk: register mpll_clk_out2 success done
[ 0.421991@0] clk_sys: register PLL sys_pll success done
[ 0.427128@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
[ 0.432466@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
[ 0.437620@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
[ 0.443139@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
[ 0.449081@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
[ 0.455038@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
[ 0.460894@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
[ 0.466762@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
[ 0.472618@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
[ 0.478514@0] gxl_clk: clock initialization complete
[ 0.483688@0] clkmsr: Gxl msr_clk_reg0=ffffff800003a75c,msr_clk_reg2=ffffff800003c764
[ 0.493888@0] aml_iomap: amlogic iomap probe done
[ 0.496736@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
[ 0.502683@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
[ 0.508910@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[ 0.516416@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
[ 0.524621@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xbc)
[ 0.532495@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xbc)
domain-0 init dvfs: 4
[ 0.550438@0] codec_mm has 2 memory regions
[ 0.550503@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[ 0.557154@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.565721@0] codec_mm has 2 memory regions
[ 0.569824@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
[ 0.577850@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
[ 0.588294@0] vpu: driver version: v02
[ 0.590124@0] vpu: load vpu_clk: 666667000Hz(7)
[ 0.594747@0] vpu: vpu_probe OK
[ 0.599557@0] tv_vout: tvout_probe
[ 0.601219@0] tv_vout: major number 254 for disp
[ 0.605846@0] vout_notify: vout_register_server
[ 0.610420@0] tv_vout: register tv module server ok
[ 0.615401@0] tv_vout: tvout_probe OK
[ 0.619634@0] canvas_probe reg=00000000c8838000,size=400
[ 0.624360@0] canvas maped reg_base =ffffff800008e000
[ 0.633732@0] rdma_probe
[ 0.961784@0] bio: create slab <bio-0> at 0
[ 0.962912@0] SCSI subsystem initialized
[ 0.964966@0] usbcore: registered new interface driver usbfs
[ 0.970177@0] usbcore: registered new interface driver hub
[ 0.975677@0] usbcore: registered new device driver usb
[ 0.981757@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
[ 0.987487@0] Linux video capture interface: v2.00
[ 0.992431@0] pps_core: LinuxPPS API ver. 1 registered
[ 0.997331@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.006880@0] PTP clock support registered
[ 1.011490@0] hdmitx: system: amhdmitx_init
[ 1.015008@0] hdmitx: system: Ver: 2014May6
[ 1.019424@0] hdmitx: system: amhdmitx_probe
[ 1.023877@0] hdmitx: system: not find match init-data
[ 1.028657@0] hdmitx: system: not find match pwr-ctl
[ 1.033667@0] hdmitx hpd irq = 89
[ 1.037437@0] hdmitx20: Mapped PHY: 0xc0800000
[ 1.041440@0] hdmitx20: Mapped PHY: 0xc1104400
[ 1.045928@0] hdmitx20: Mapped PHY: 0xc8100000
[ 1.050359@0] hdmitx20: Mapped PHY: 0xc8834000
[ 1.054818@0] hdmitx20: Mapped PHY: 0xc883a000
[ 1.059289@0] hdmitx20: Mapped PHY: 0xc883c000
[ 1.063747@0] hdmitx20: Mapped PHY: 0xd0100000
[ 1.068207@0] hdmitx20: Mapped PHY: 0xda83a000
[ 1.072682@0] hdmitx: alread display in uboot 0x861
[ 1.077587@0] avmute set to 1
[ 1.080987@0] vout_serve: vout_init_module
[ 1.084814@0] tv_vout: tv_set_current_vmode[759]fps_target_mode=40
[ 1.090876@0] hdmitx: system: irq 80000002
[ 1.095003@0] tv_vout: mode is 40,sync_duration_den=1,sync_duration_num=60
[ 1.101899@0] tv_vout: already display in uboot
[ 1.106450@0] vout_serve: vinfo mode is: 2160p60hz420
[ 1.111518@0] vout_serve: init mode 2160p60hz420
[ 1.116299@0] vout_serve: create vout attribute OK
[ 1.120978@0] vout_serve: meson_vout_probe OK
[ 1.125552@0] logo: logo_init
[ 1.128580@0] osd_rdma: osd_rdma_init: rdma_table p=0x35841000,op=0x35841000 , v=0xffffff80000a9000
[ 1.137444@0] osd_rdma: osd rdma request irq as second interrput function!
[ 1.144804@0] Advanced Linux Sound Architecture Driver Initialized.
[ 1.151367@0] Bluetooth: Core ver 2.18
[ 1.154507@0] NET: Registered protocol family 31
[ 1.181473@0] cfg80211: Calling CRDA to update world regulatory domain
[ 1.187713@0] NetLabel: Initializing
[ 1.208419@0] Switched to clocksource arch_sys_counter
[ 1.260568@0] [amlatvdemod..]aml_atvdemod_init.
[ 1.260705@0] NET: Registered protocol family 2
[ 1.264626@0] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.271434@0] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 1.278218@0] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.284758@0] TCP: reno registered
[ 1.288064@0] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.294210@0] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.301017@0] NET: Registered protocol family 1
[ 1.305586@0] RPC: Registered named UNIX socket transport module.
[ 1.311434@0] RPC: Registered udp transport module.
[ 1.316349@0] RPC: Registered tcp transport module.
[ 1.321228@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.328085@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
[ 1.334030@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output
[ 1.340614@0] aml_wifi wifi.32: [wifi_dev_probe] dhd_static_buf setup
[ 1.347109@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
[ 1.354678@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
[ 1.360867@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
[ 1.368313@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
[ 1.374429@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
[ 1.380810@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
[ 1.386266@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
[ 1.392469@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
[ 1.398983@0] Unpacking initramfs...
[ 1.434217@0] Freeing initrd memory: 900K (ffffffc033dd1000 - ffffffc033eb2000)
[ 1.440416@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.442435@0] audit: initializing netlink subsys (disabled)
[ 1.448059@0] audit: type=2000 audit(1.270:1): initialized
[ 1.453647@0] hdmitx: plugin
[ 1.459429@2] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.470877@2] VFS: Disk quotas dquot_6.5.2
[ 1.471176@2] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.481522@2] NFS: Registering the id_resolver key type
[ 1.481595@2] Key type id_resolver registered
[ 1.485684@2] Key type id_legacy registered
[ 1.489920@2] NTFS driver 2.1.30 [Flags: R/O].
[ 1.494805@2] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.502495@2] fuse init (API version 7.22)
[ 1.506428@2] msgmni has been set to 1633
[ 1.511463@2] NET: Registered protocol family 38
[ 1.514797@2] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.522018@2] io scheduler noop registered
[ 1.526110@2] io scheduler deadline registered
[ 1.530843@2] io scheduler cfq registered (default)
[ 1.591840@2] meson-rng c8834000.rng: hwrng registered
[ 1.595550@2] loop: module loaded
[ 1.595584@0] hdmitx: edid: check sum valid
[ 1.596295@2] zram: Created 1 device(s) ...
[ 1.597531@2] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 1.598341@2] tun: Universal TUN/TAP device driver, 1.6
[ 1.598344@2] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.610581@2] libphy: stmmac: probed
[ 1.610589@2] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
[ 1.611114@2] PPP generic driver version 2.4.2
[ 1.611348@2] PPP BSD Compression module registered
[ 1.611351@2] PPP Deflate Compression module registered
[ 1.611381@2] PPP MPPE Compression module registered
[ 1.611384@2] NET: Registered protocol family 24
[ 1.611571@2] usbcore: registered new interface driver asix
[ 1.611752@2] usbcore: registered new interface driver ax88179_178a
[ 1.611867@2] usbcore: registered new interface driver cdc_ether
[ 1.611977@2] usbcore: registered new interface driver net1080
[ 1.612092@2] usbcore: registered new interface driver cdc_subset
[ 1.612205@2] usbcore: registered new interface driver zaurus
[ 1.612366@2] usbcore: registered new interface driver cdc_ncm
[ 1.612757@2] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.612761@2] ehci-h20ahb: H20AHB-EHCI Host Controller driver
[ 1.613056@2] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.613548@2] usbcore: registered new interface driver cdc_acm
[ 1.613551@2] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.613693@2] usbcore: registered new interface driver usb-storage
[ 1.613982@2] usbcore: registered new interface driver usbserial
[ 1.614826@2] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff80000ec000
[ 1.615125@2] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[ 1.615159@2] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff80000ee080
[ 1.615967@2] mousedev: PS/2 mouse device common for all mice
[ 1.616677@2] usbcore: registered new interface driver xpad
[ 1.616912@2] i2c /dev entries driver
[ 1.617330@2] usbcore: registered new interface driver uvcvideo
[ 1.617332@2] USB Video Class driver (1.1.1)
[ 1.618358@2] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.618525@2] Bluetooth: HCI UART driver ver 2.2
[ 1.618530@2] Bluetooth: HCI H4 protocol initialized
[ 1.619209@2] CPUidle arm64: cpuidle init start!!
[ 1.620213@2] @@@@@@@@@@_____2______in dia_init()
[ 1.620521@2] ATVR driver - init called!
[ 1.620521@2] usbcore: registered new interface driver usbhid
[ 1.620524@2] usbhid: USB HID core driver
[ 1.620998@2] ashmem: initialized
[ 1.621201@2] logger: created 256K log 'log_main'
[ 1.621376@2] logger: created 256K log 'log_events'
[ 1.621551@2] logger: created 256K log 'log_radio'
[ 1.621704@2] logger: created 256K log 'log_system'
[ 1.623129@2] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80000fa4c0
[ 1.623164@2] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
[ 1.877035@0] hdmitx: edid: check sum valid
[ 1.881172@0] hdmitx: edid: blk0 raw data
[ 1.885195@0] 00ffffffffffff0021573618bde90200251d010380351d7822ee91a3544c9926
[ 1.885195@0] 0f5054e57f80810081408180904095000940a940b300011d007251d01e206e28
[ 1.885195@0] 55000f484200001e000000fa0001000100010001000100010000000000ff0020
[ 1.885195@0] 20202020202020202020202001000000000000000000000000000000001801f7
[ 1.885195@0]
[ 1.885195@0]
[ 1.917587@0] hdmitx: edid: blk1 raw data
[ 1.921607@0] 020332f150021113041f900312061507160514212223097f07830100006e030c
[ 1.921607@0] 001000093c20008001020304e50e61606505662150b051001b30407036000f48
[ 1.921607@0] 4200001e662156aa51001e30468f33000f484200001e8c0ad08a20e02d10103e
[ 1.921607@0] 960010090000001800000000000000000000000000000000000000000000004f
[ 1.921607@0]
[ 1.921607@0]
[ 1.953993@0] EDID Parser:
[ 1.956718@0] hdmitx: edid: find IEEEOUT
[ 1.960649@0]
[ 1.962245@0] hdmitx: edid: check sum valid
[ 1.966468@0] hdmitx: edid: check sum valid
[ 1.970657@0] hdmitx: update RX hdr info 0
[ 1.976810@0] [RX]-receive ksv list len:1,depth:1,cas:0,dev:0
[ 1.980568@0] hdmitx: video: get current mode: 2160p60hz420
[ 1.986132@0] hdmitx: update rx hdr info 0
[ 1.990263@0] hdmitx: get ext_name
[ 1.993751@0] hdmitx: system: [set_disp_mode_auto] ALREADY init VIC = 353
[ 2.000602@0] hdmtix: set audio
[ 2.003728@0] hdmitx tx_aud_src = 0
[ 2.007246@0] hdmitx: fs = 0, cd = 4, tmds_clk = 594000
[ 2.012479@0] hdmitx aud_n_para = 6144
[ 2.016271@0] hdmitx set channel status
[ 2.025600@2] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[ 2.028229@2] console [ttyS0] enabled
[ 2.028229@2] console [ttyS0] enabled
[ 2.035471@2] bootconsole [earlycon0] disabled
[ 2.035471@2] bootconsole [earlycon0] disabled
[ 2.044743@2] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80000fc4c0
[ 2.051286@2] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
[ 2.061337@2] hdmitx: system: hdmitx_hdcp_init
[ 2.065129@2] ESM HLD: Initializing...
[ 2.068685@2] ESM HLD: Registering device range 'esm'...
[ 2.073939@2] ESM HLD: Device range 'esm' has been registered.
[ 2.079718@2] ESM HLD: Creating class /sys/class/elliptic...
[ 2.085418@2] ESM HLD: The class /sys/class/elliptic has been created.
[ 2.091795@2] ESM HLD: Creating device 'esm'...
[ 2.096425@2] ESM HLD: Device 'esm' has been created.
[ 2.101284@2] ESM HLD: Done initializing the HLD driver.
INFO: HDCP22 key read fail!
INFO: p1d 0
INFO: pd1 0
[ 2.122541@2] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
[ 2.124005@2] secmon has 1 memory regions
[ 2.127252@2] secmon: share in base: 0xffffff800010e000, share out base: 0xffffff800011a000
[ 2.135523@2] secmon secmon.4: assigned reserved memory node linux,secmon ok
[ 2.142491@2] secmon: probe done
[ 2.146036@2] storage: storage in base: 0xffffff8001800000
[ 2.151122@2] storage: storage out base: 0xffffff8001880000
[ 2.156629@2] storage: storage block base: 0xffffff8001900000
[ 2.162327@2] storage: probe done!
[ 2.166275@2] aml_sd_emmc_probe: line 3582
[ 2.169755@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
[ 2.179668@0] aml_sd_emmc_reg_init 1149
[ 2.183018@0] get property: ocr_avail, value:0x00200080
[ 2.189424@0] get property: f_min, value:300000
[ 2.195529@0] get property: f_max, value:100000000
[ 2.201937@0] get property: max_req_size, value:0x00020000
[ 2.208384@0] get property: pinname, str:emmc
[ 2.214182@0] get property: card_type, value:1
[ 2.219870@0] get property: gpio_dat3, str:
[ 2.225285@0] get property: hw_reset, str:
[ 2.230776@0] emmc:pdata->caps = c0000d47
[ 2.234691@0] emmc:pdata->caps2 = 18060
[ 2.238501@0] storage 1, boot 1
[ 2.241585@0] get_storage_dev return 1
[ 2.278427@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.283908@2] aml_sd_emmc_probe: line 3582
[ 2.284319@2] aml_sd_emmc_reg_init 1149
[ 2.286559@2] get property: ocr_avail, value:0x00200080
[ 2.292945@2] get property: f_min, value:400000
[ 2.299062@2] get property: f_max, value:100000000
[ 2.305437@2] get property: max_req_size, value:0x00020000
[ 2.311913@2] get property: irq_in, value:3
[ 2.317598@2] get property: irq_out, value:5
[ 2.323304@2] get property: gpio_cd, str:
[ 2.328733@2] get property: pinname, str:sd
[ 2.334332@2] get property: jtag_pin, str:
[ 2.339773@2] get property: card_type, value:5
[ 2.345458@2] get property: gpio_dat3, str:
[ 2.350910@2] sd:pdata->caps = 7
[ 2.354081@2] sd:pdata->caps2 = 0
[ 2.362589@3] emmc: BKOPS_EN bit is not set
[ 2.368984@3] emmc: trying cali 0-th time(s)
[ 2.377142@3] emmc: delay[0]= 1400 padding= 3, bidx=1
[ 2.377164@3] emmc: delay[1]= 1600 padding= 2, bidx=1
[ 2.381560@3] emmc: delay[2]= 1200 padding= 4, bidx=1
[ 2.386554@3] emmc: delay[3]= 1600 padding= 2, bidx=1
[ 2.388654@2] [aml_is_card_insert] card OUT
[ 2.388719@1] [aml_is_card_insert] card OUT
[ 2.388733@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.388779@1] aml_sd_emmc_probe: line 3582
[ 2.389116@1] aml_sd_emmc_reg_init 1149
[ 2.389176@1] get property: ocr_avail, value:0x00200080
[ 2.389179@1] get property: f_min, value:400000
[ 2.389182@1] get property: f_max, value:200000000
[ 2.389185@1] get property: max_req_size, value:0x00020000
[ 2.389192@1] get property: pinname, str:sdio
[ 2.389196@1] get property: card_type, value:3
[ 2.389243@1] sdio:pdata->caps = 7810f
[ 2.389246@1] sdio:pdata->caps2 = 0
[ 2.428434@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
[ 2.428879@1] ion_dev has 1 memory regions
[ 2.431843@1] fb: osd_init_module
[ 2.431996@1] fb: viu vsync irq: 35
[ 2.432004@1] meson-fb has 1 memory regions
[ 2.432047@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
[ 2.432063@1] fb: osd_probe vinfo:ffffffc002087e10
[ 2.432069@1] fb: init fbdev bpp is:32
[ 2.494484@3] emmc: delay[4]= 1600 padding= 2, bidx=1
[ 2.499414@3] emmc: delay[5]= 1600 padding= 2, bidx=1
[ 2.504286@3] emmc: delay[6]= 1600 padding= 2, bidx=1
[ 2.509296@3] emmc: delay[7]= 1600 padding= 2, bidx=1
[ 2.513788@0] fb: osd probe OK
[ 2.514104@1] ge2d: ge2d_init_module
[ 2.514120@1] ge2d: ge2d_dev major:243
[ 2.514568@1] ge2d: ge2d clock is 400 MHZ
[ 2.514574@1] ge2d: ge2d: pdev=ffffffc0275cde00, irq=182, rstc=0xffffffc027748e40, clk=ffffffc027591b00
[ 2.514647@1] ge2d: mapped phy: 0xd0160000
[ 2.514654@1] ge2d: ge2d start monitor
[ 2.514739@2] ge2d: ge2d workqueue monitor start
[ 2.514973@1] sysled: module init
[ 2.515123@1] sysled: led_gpio = 228
[ 2.515124@1] sysled: active_low = 0
[ 2.515333@1] sysled: module probed ok
[ 2.515828@1] pwmled: module init
[ 2.515940@1] codec:Amlogic A/V streaming port init
[ 2.517764@1] codec:get gate demux control ok ffffffc027690a40
[ 2.517772@1] codec:get gate parser_top control ok ffffffc0275963c0
[ 2.517779@1] codec:get gate vpu_intr control ok ffffffc0275b7680
[ 2.517787@1] codec:get gate vdec control ok ffffffc027677d40
[ 2.518697@1] codec:[tsync_pcr_init]init success.
[ 2.518701@1] codec:amvideocap_init_module
[ 2.518887@1] codec:amvideocap_probe,amvideocap
[ 2.518892@1] codec:use cma buf.
[ 2.518894@1] codec:amvideocap_dev_register
[ 2.521374@1] amvenc_avc_probe -- reserved memory config fail.
[ 2.521379@1] amvenc_avc - cma memory pool size: 40 MB
[ 2.521403@1] encode_wq_init.
[ 2.521412@1] encode start monitor.
[ 2.521493@2] encode workqueue monitor start.
[ 2.522062@1] jpegenc module init
[ 2.522485@1] codec:picdec_driver_probe called.
[ 2.522490@1] picdec has 1 memory regions
[ 2.522527@1] codec:picdec_driver_probe done.
[ 2.523763@1] codec:create_ge2d_work_queue video task ok
[ 2.659482@3] emmc: calibration result @ 0: max(1600), min(1200)
[ 2.659580@1] rdma_register, rdma_table_addr ffffff80003d1000 rdma_table_addr_phy 35848000 reg_buf ffffffc026758000
[ 2.659585@1] rdma_register successe handle 1 table_size 32768
[ 2.659587@1] video_rdma:rdma_init video rdma handle = 1.
[ 2.659595@1] codec:used fix clk for vdec clk source!
[ 2.659603@1] codec:register clk_set_setting cpu[33]
[ 2.660031@1] vpu_init
[ 2.660033@1] The chip is not support hevc encoder
[ 2.660037@1] DI: di_module_init ok.
[ 2.660046@1] DI: di_module_init: major 237
[ 2.660612@1] DI: di_probe
[ 2.660811@1] deinterlace has 1 memory regions
[ 2.660861@1] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
[ 2.660888@1] di_irq:78,timerc_irq:38
[ 2.661054@1] rdma_register, rdma_table_addr ffffff8000169000 rdma_table_addr_phy 35850000 reg_buf ffffffc025cf0000
[ 2.661057@1] rdma_register success, handle 2 table_size 8192
[ 2.661059@1] DI: di_probe allocate rdma channel 2.
[ 2.661064@1] DI: DI hw version 2.
[ 2.661079@1] 0x000000db:Y=db,U=0,V=0
[ 2.661081@1] 0x000000dc:Y=dc,U=0,V=0
[ 2.661083@1] 0x000000dd:Y=dd,U=0,V=0
[ 2.661085@1] 0x000000de:Y=de,U=0,V=0
[ 2.661087@1] 0x000000df:Y=df,U=0,V=0
[ 2.661089@1] 0x000000e0:Y=e0,U=0,V=0
[ 2.661090@1] 0x000000e1:Y=e1,U=0,V=0
[ 2.661092@1] 0x000000e2:Y=e2,U=0,V=0
[ 2.661095@1] 0x000000e3:Y=e3,U=0,V=0
[ 2.661097@1] 0x000000f0:Y=f0,U=0,V=0
[ 2.661101@1] 0x000000f1:Y=f1,U=0,V=0
[ 2.661103@1] 0x000000f2:Y=f2,U=0,V=0
[ 2.661105@1] 0x000000f3:Y=f3,U=0,V=0
[ 2.661107@1] 0x000000f4:Y=f4,U=0,V=0
[ 2.661109@1] 0x000000f5:Y=f5,U=0,V=0
[ 2.661111@1] 0x000000f6:Y=f6,U=0,V=0
[ 2.661117@1] 0x000000f7:Y=f7,U=0,V=0
[ 2.661118@1] 0x000000f8:Y=f8,U=0,V=0
[ 2.661121@1] 0x000000f9:Y=f9,U=0,V=0
[ 2.661123@1] 0x000000fa:Y=fa,U=0,V=0
[ 2.661125@1] 0x000000fb:Y=fb,U=0,V=0
[ 2.661126@1] 0x000000fc:Y=fc,U=0,V=0
[ 2.661326@1] DI: di_probe here.
[ 2.661801@1] efusekeynum: 4
[ 2.661811@1] efusekeyname: mac offset: 0 size: 6
[ 2.661818@1] efusekeyname: mac_bt offset: 6 size: 6
[ 2.661824@1] efusekeyname: mac_wifi offset: 12 size: 6
[ 2.661831@1] efusekeyname: usid offset: 18 size: 16
[ 2.662130@1] efuse efuse.10: probe OK!
[ 2.662571@1] key unify config unifykey-num is 14
[ 2.662638@1] key unify fact unifykey-num is 14
[ 2.662645@1] aml_unifykeys_probe:1281=============unifykey_devno:eb00000
[ 2.662918@1] 6unifykey: device unifykeys created ok
[ 2.663058@1] 6aml_unifykeys_init done!
[ 2.663061@1] PPMGRDRV: warn: ppmgr module init func called
[ 2.663215@1] PPMGRDRV: err: ppmgr_driver_probe called
[ 2.663219@1] ppmgr has 1 memory regions
[ 2.663262@1] PPMGRDRV: info: ppmgr_dev major:234
[ 2.663538@1] PPMGRDRV: info: ppmgr_probe done
[ 2.664062@1] amlogic rfkill init
[ 2.664190@1] enter bt_probe of_node
[ 2.664212@1] not get gpio_en
[ 2.664597@1] power on valid level is high
[ 2.664598@1] Bluetooth: BlueSleep Mode Driver Ver 1.2
[ 2.665184@1] ionvideo-000: V4L2 device registered as video13
[ 2.665188@1] ionvid: info: Video Technology Magazine Ion Video
[ 2.665189@1] ionvid: info: Capture Board ver 1.0 successfully loaded
[ 2.665200@1] audio_dsp: [dsp]register dsp to char divece(257)
[ 2.665960@1] amaudio: amaudio: driver amaudio succuess!
[ 2.666367@1] amlvid:err: amlvideo_init called
[ 2.666367@1] amlvid:err: amlvideo_create_instance called
[ 2.666373@1] amlvid:err: v4l2_dev.name=:amlvideo-000
[ 2.666529@1] amlvideo-000: V4L2 device registered as video10
[ 2.666966@1] vdin_drv_init: major 233
[ 2.667349@1] vdin_drv_init: vdin driver init done
[ 2.667357@1] tvafe_drv_init: major 232
[ 2.667724@1] tvafe: tvafe_init.
[ 2.668093@1] [RX]-hdmirx: hdmirx_init.
[ 2.668099@1] ESM HLD: Initializing...
[ 2.668101@1] ESM HLD: Registering device range 'esm_rx'...
[ 2.668109@1] ESM HLD: Device range 'esm_rx' has been registered.
[ 2.668111@1] ESM HLD: Creating class /sys/class/elliptic_rx...
[ 2.668208@1] ESM HLD: The class /sys/class/elliptic_rx has been created.
[ 2.668211@1] ESM HLD: Creating device 'esm_rx'...
[ 2.668354@1] ESM HLD: Device 'esm_rx' has been created.
[ 2.668355@1] ESM HLD: Done initializing the HLD driver.
[ 2.668358@1] [viuin..]viuin_init_module viuin module init
[ 2.669090@1] [viuin..]viuin_probe probe ok.
[ 2.669187@1] module init
[ 2.669355@1]
[ 2.669355@1] VECM probe start
[ 2.669684@1] aml_vecm_probe: ok
[ 2.670464@1] saradc c1108680.saradc: initialized by BL30
[ 2.670477@1] saradc c1108680.saradc: calibration start:
[ 2.670524@1] saradc c1108680.saradc: nominal=0, value=3
[ 2.670568@1] saradc c1108680.saradc: nominal=256, value=251
[ 2.670613@1] saradc c1108680.saradc: nominal=512, value=501
[ 2.670658@1] saradc c1108680.saradc: nominal=768, value=749
[ 2.670702@1] saradc c1108680.saradc: nominal=1023, value=999
[ 2.670706@1] saradc c1108680.saradc: calibration end: coef=4211
[ 2.670941@1] remote: Driver init
[ 2.671035@1] remote: platform_data g_remote_ao_offset=580
[ 2.671037@1] remote: platform_data irq =228
[ 2.671070@1] remote: set drvdata completed
[ 2.671083@1] remote: device_create_file completed
[ 2.671452@1] input: aml_keypad as /devices/meson-remote.12/input/input0
[ 2.671786@1] remote: input_register_device completed
[ 2.671866@1] remote: set_remote_mode[74]
[ 2.671902@1] remote: remote config major:229
[ 2.672134@1] remote: physical address:0x258ba000
[ 2.672882@1] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
[ 2.672888@1] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
[ 2.672910@1] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
[ 2.672963@1] gpio-key gpio_keypad.47: start setup_timer
[ 2.672972@1] gpio-key gpio_keypad.47: power key(116) registed.
[ 2.673233@1] input: gpio_keypad as /devices/gpio_keypad.47/input/input1
[ 2.673394@1] gpio-key gpio_keypad.47: gpio keypad register input device completed.
[ 2.673405@1] input input1: gpio keypad major:228
[ 2.674828@1] Sensor: lsm303d_init
[ 2.675075@1] Sensor: stk8313_init
[ 2.675172@1] Sensor: stk831x_init
[ 2.675261@1] Sensor: mxc622x_acc_init
[ 2.675344@1] Sensor: mxc6255xc_acc_init
[ 2.675516@1] Sensor: l3gd20_gyr_init
[ 2.676652@1] aml dvb init
[ 2.677173@1] Amlogic Demod DVB-T/C DebugIF Init
[ 2.677418@1] Amlogic Demod DVB-T/C DebugIF Init ok----------------
[ 2.678601@1] jtag: module init
[ 2.678949@1] jtag: pinctrl setup apao
[ 2.678952@1] jtag: set state 2
[ 2.768442@1] input input1: key 116 up
[ 3.256782@3] emmc: line_delay =0x201, max_cal_result =1600
[ 3.262209@3] emmc: base_index_max 1, base_index_min 1
[ 3.267260@3] emmc: clk 100000000 SDR mode tuning start
fuse_pw_en: 0x3
WARNING! efuse bits is disabled
Enable A53 JTAG to AO
[ 3.284646@0] jtag: module probed ok
[ 3.284978@3] emmc: rx_tuning_result[0] = 10
[ 3.285250@1] cpuinfo: probe done
[ 3.285747@1] defendkey c8834500.defendkey: defendkey_devno:e000000
[ 3.286047@1] defendkey c8834500.defendkey: defendkey: device defendkey created ok
[ 3.286261@1] defendkey: driver init
[ 3.307719@1] input: cec_input as /devices/virtual/input/input2
[ 3.307824@3] emmc: rx_tuning_result[1] = 10
[ 3.308128@3] emmc: rx_tuning_result[2] = 10
[ 3.308436@3] emmc: rx_tuning_result[3] = 10
[ 3.308738@3] emmc: rx_tuning_result[4] = 10
[ 3.309037@3] emmc: rx_tuning_result[5] = 10
[ 3.309336@3] emmc: rx_tuning_result[6] = 10
[ 3.309637@3] emmc: rx_tuning_result[7] = 10
[ 3.309937@3] emmc: rx_tuning_result[8] = 10
[ 3.310238@3] emmc: rx_tuning_result[9] = 10
[ 3.310240@3] emmc: best_win_start =0, best_win_size =10
[ 3.310244@3] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x2000
[ 3.310249@3] emmc: gclock =0x100024a, gdelay=0x201, gadjust=0x2000
[ 3.310382@3] emmc: support driver strength type 1
[ 3.310435@3] emmc: try set sd/emmc to DDR mode
[ 3.310440@3] emmc: try set sd/emmc to DDR mode
[ 3.310543@3] emmc: new HS400 MMC card at address 0001
[ 3.389183@0] emmc: clock 100000000, 8-bit-bus-width
[ 3.389183@0]
[ 3.389184@0] cectx aocec: no hdmirx reg resource
[ 3.400160@0] cectx aocec: no hhi reg resource
[ 3.400333@3] mmcblk0: emmc:0001 8WMB3R 7.28 GiB
[ 3.400499@3] mmcblk0boot0: emmc:0001 8WMB3R partition 1 4.00 MiB
[ 3.400630@3] mmcblk0boot1: emmc:0001 8WMB3R partition 2 4.00 MiB
[ 3.400754@3] mmcblk0rpmb: emmc:0001 8WMB3R partition 3 512 KiB
[ 3.427283@0] cectx aocec: can't find hdmirx
[ 3.432401@0] cec: wake up flag:0
[ 3.435641@0] aml_aes_dma c883e000.aml_aes: Aml AES_dma
[ 3.440519@3] aml_tdes_dma c883e000.aml_tdes: Aml TDES_dma
[ 3.445997@3] aml_sha_dma c883e000.aml_sha: Aml SHA1/SHA224/SHA256 dma
[ 3.452160@3] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 >
[ 3.460392@3] usbcore: registered new interface driver snd-usb-audio
[ 3.467292@3] Delete invalid mbr partition part ffffffc025ea7c00, part->partno 1
[ 3.472694@3] Delete invalid mbr partition part ffffffc025ec8000, part->partno 2
[ 3.472840@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[ 3.486749@3] Delete invalid mbr partition part ffffffc025ec8400, part->partno 3
[ 3.494674@3] Delete invalid mbr partition part ffffffc025ec8800, part->partno 4
[ 3.501855@3] Delete invalid mbr partition part ffffffc025ec8c00, part->partno 5
[ 3.509660@3] Delete invalid mbr partition part ffffffc025ec9000, part->partno 6
[ 3.516083@3] aml_pcm_dai: pcm mode detection =1
[ 3.520689@2] Delete invalid mbr partition part ffffffc025ec9400, part->partno 7
[ 3.528002@2] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
[ 3.528738@1] Delete invalid mbr partition part ffffffc025ec9800, part->partno 8
[ 3.528870@1] Delete invalid mbr partition part ffffffc025ec9c00, part->partno 9
[ 3.528989@1] Delete invalid mbr partition part ffffffc0276e2800, part->partno 10
[ 3.529100@1] Delete invalid mbr partition part ffffffc0276e3c00, part->partno 11
[ 3.529215@1] Delete invalid mbr partition part ffffffc0276e3400, part->partno 12
[ 3.529328@1] Delete invalid mbr partition part ffffffc0276e3000, part->partno 13
[ 3.529440@1] Delete invalid mbr partition part ffffffc0276e2c00, part->partno 14
[ 3.529553@1] Delete invalid mbr partition part ffffffc0276e2400, part->partno 15
[ 3.530265@3] [mmc_read_partition_tbl] mmc read partition OK!
[ 3.530267@3] add_emmc_partition
[ 3.530581@3] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
[ 3.530775@3] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
[ 3.530931@3] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
[ 3.531088@3] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
[ 3.531232@3] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
[ 3.531393@3] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
[ 3.531539@3] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
[ 3.531693@3] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
[ 3.531848@3] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
[ 3.531996@3] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
[ 3.532159@3] [mmcblk0p11] instaboot offset 0x000034400000, size 0x000020000000
[ 3.532308@3] [mmcblk0p12] boot offset 0x000054c00000, size 0x000002000000
[ 3.532462@3] [mmcblk0p13] system offset 0x000057400000, size 0x000060000000
[ 3.532608@3] [mmcblk0p14] data offset 0x0000b7c00000, size 0x00011a400000
[ 3.532654@3] card key: card_blk_probe.
[ 3.532659@3] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
[ 3.532662@3] emmc key: emmc_key_init:552 ok.
[ 3.536514@3] amlmmc_dtb_init: register dtb chardev
[ 3.536514@3] calc 2a002972, store 2a002972
[ 3.540062@3] calc 2a002972, store 2a002972
[ 3.540068@3] total valid 2
[ 3.540718@3] amlmmc_dtb_init: register dtb chardev OK
[ 3.540718@3] Exit aml_emmc_partition_ops OK.
[ 3.543028@3] mmcblk0boot1: unknown partition table
[ 3.544185@3] mmcblk0boot0: unknown partition table
[ 3.544562@3] clear_emmc_wait_flag
[ 3.773427@2] aml_spdif_dai: set normal 512 fs /4 fs
[ 3.778285@2] aml_audio_hw: IEC958 16bit
[ 3.782178@2] hdmitx: audio: aout notify rate 48000
[ 3.786987@2] hdmitx: audio: aout notify size 16
[ 3.791571@2] hdmitx: audio: aout notify format CT_PCM
[ 3.796648@2] hdmtix: set audio
[ 3.799778@2] hdmitx tx_aud_src = 0
[ 3.803228@2] hdmitx: fs = 3, cd = 4, tmds_clk = 594000
[ 3.808377@2] hdmitx aud_n_para = 6144
[ 3.812125@2] hdmitx set channel status
[ 3.815942@2] hdmitx: audio: Audio Type: PCM
[ 3.820123@2] hdmitx: audio: set audio param
[ 4.028665@3] aml_snd_card: headphone detection disable=1
[ 4.029303@3] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
[ 4.036457@3] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
[ 4.043208@3] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0
[ 4.049590@3] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
[ 4.056566@3] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
[ 4.064148@3] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[ 4.072940@3] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
[ 4.080528@3] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[ 4.199098@3] GACT probability NOT on
[ 4.199132@3] Mirror/redirect action on
[ 4.200929@3] u32 classifier
[ 4.203772@3] Actions configured
[ 4.207312@3] Netfilter messages via NETLINK v0.30.
[ 4.212209@3] nf_conntrack version 0.5.0 (6534 buckets, 26136 max)
[ 4.218787@3] ctnetlink v0.93: registering with nfnetlink.
[ 4.224260@3] xt_time: kernel timezone is -0000
[ 4.228275@3] ipip: IPv4 over IPv4 tunneling driver
[ 4.233873@3] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.238604@3] arp_tables: (C) 2002 David S. Miller
[ 4.243241@3] TCP: cubic registered
[ 4.246638@3] Initializing XFRM netlink socket
[ 4.252072@3] NET: Registered protocol family 10
[ 4.256756@3] mip6: Mobile IPv6
[ 4.258765@3] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.264474@3] sit: IPv6 over IPv4 tunneling driver
[ 4.270544@3] NET: Registered protocol family 17
[ 4.273596@3] NET: Registered protocol family 15
[ 4.278236@3] Bridge firewalling registered
[ 4.282386@3] Bluetooth: RFCOMM TTY layer initialized
[ 4.287284@3] Bluetooth: RFCOMM socket layer initialized
[ 4.292577@3] Bluetooth: RFCOMM ver 1.11
[ 4.323482@3] l2tp_core: L2TP core driver, V2.0
[ 4.327895@3] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 4.332811@3] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 4.338547@3] l2tp_netlink: L2TP netlink interface
[ 4.343278@3] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 4.349330@3] l2tp_debugfs: L2TP debugfs support
[ 4.353848@3] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 4.360469@3] NET: Registered protocol family 35
[ 4.365040@3] Key type dns_resolver registered
[ 4.370897@3] Registering SWP/SWPB emulation handler
[ 4.375015@3] regulator-dummy: disabling
[ 4.378612@3] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:09 UTC (1420070409)
[ 4.387670@3] cpufreq-scpi cpufreq-meson.7: enter cpufreq
[ 4.391944@3] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
[ 4.400712@3] gxbb_pm: enter meson_pm_probe!
[ 4.402017@3] gxbb_pm: meson_pm_probe done
[ 4.406756@3] cpucore_cooling_register, max_cpu_core_num:4
[ 4.426793@3] aml_istbt_dev_ready NULL
[ 4.42684[ 4.431555@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 4.435033@3] Freeing unused kernel memory: 1260K (ffffffc001eac000 - ffffffc001fe7000)
[ 4.458594@0] init: init started!
[ 4.460050@1] init: init second stage started!
[ 4.461120@1] init: waitpid failed: No child processes
[ 4.465957@1] init: (Loading properties from /default.prop took 0.00s.)
[ 4.474052@1] init: (Parsing /init.environ.rc took 0.00s.)
[ 4.477984@1] init: (Parsing /init.usb.rc took 0.00s.)
[ 4.483906@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
[ 4.489021@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
[ 4.494249@1] init: (Parsing init.amlogic.board.rc took 0.01s.)
[ 4.500497@1] init: (Parsing init.amlogic.usb.rc took 0.00s.)
[ 4.505808@1] init: (Parsing init.amlogic.wifi.rc took 0.01s.)
[ 4.511682@1] init: could not import file 'init.mtk.rc' from '/init.amlogic.rc'
[ 4.518867@1] init: (Parsing /init.amlogic.rc took 0.04s.)
[ 4.524638@1] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[ 4.530272@1] init: (Parsing /init.zygote32.rc took 0.00s.)
[ 4.535731@1] init: (Parsing /init.trace.rc took 0.00s.)
[ 4.540966@1] init: (Parsing /init.rc took 0.07s.)
[ 4.545973@1] init: Starting service 'ueventd'...
[ 4.552093@3] ueventd: ueventd started!
[ 4.828053@3] ueventd: Coldboot took 0.27s.
[ 4.833961@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 4.853135@1] init: enter do_confirm_formated /dev/block/tee, /tee
[ 4.853690@1] init: blocksize 1024, bytes_per_inode 1024
[ 4.859127@1] init: do_confirm_formated ext4 try mount
[ 4.869676@3] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[ 4.925131@1] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: (null)
[ 4.927889@1] fs_mgr: __mount(source=/dev/block/system,target=/system,type=ext4)=0
[ 4.935973@1] EXT4-fs (mmcblk0p14): Ignoring removed nomblk_io_submit option
[ 4.945885@1] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 4.953168@1] fs_mgr: check_fs(): mount(/dev/block/data,/data,ext4)=0: Success
[ 5.009678@0] fs_mgr: check_fs(): unmount(/data) succeeded
[ 5.010544@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/data
[ 5.081168@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.081168@0]
[ 5.081911@0] e2fsck: /dev/block/data: clean, 1100/289152 files, 110128/1156096 blocks
[ 5.081911@0]
[ 5.092078@0] EXT4-fs (mmcblk0p14): Ignoring removed nomblk_io_submit option
[ 5.101885@0] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 5.109649@0] fs_mgr: __mount(source=/dev/block/data,target=/data,type=ext4)=0
[ 5.117260@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[ 5.126921@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 5.134382@0] fs_mgr: check_fs(): mount(/dev/block/cache,/cache,ext4)=0: Success
[ 5.179674@0] fs_mgr: check_fs(): unmount(/cache) succeeded
[ 5.179743@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/cache
[ 5.206223@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.206223@0]
[ 5.206958@0] e2fsck: /dev/block/cache: clean, 22/32768 files, 4265/131072 blocks
[ 5.206958@0]
[ 5.216755@0] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
[ 5.226266@0] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 5.234197@0] fs_mgr: __mount(source=/dev/block/cache,target=/cache,type=ext4)=0
[ 5.242081@0] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
[ 5.250934@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 5.258941@0] fs_mgr: check_fs(): mount(/dev/block/tee,/tee,ext4)=0: Success
[ 5.319885@0] fs_mgr: check_fs(): unmount(/tee) succeeded
[ 5.319954@0] fs_mgr: Running /system/bin/e2fsck on /dev/block/tee
[ 5.344866@0] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 5.344866@0]
[ 5.345604@0] e2fsck: /dev/block/tee: clean, 11/8192 files, 3111/8192 blocks
[ 5.345604@0]
[ 5.354939@0] EXT4-fs (mmcblk0p8): Ignoring removed nomblk_io_submit option
[ 5.363681@0] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
[ 5.372404@0] fs_mgr: __mount(source=/dev/block/tee,target=/tee,type=ext4)=0
[ 5.404149@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
[ 5.446283@0] EXT4-fs (zram0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.451884@0] init: cannot find '/system/bin/tee-supplicant', disabling 'tee_supplicant'
[ 5.468836@0] init: /recovery not specified in fstab
[ 5.483757@3] logd.auditd: start
[ 5.483825@3] logd.klogd: 5315402917
[ 5.501872@0] init: Failed to reload policy
[ 5.535596@0] mali-utgard d00c0000.mali: set min pp to default 1
[ 5.535972@0] mali-utgard d00c0000.mali: set min clk default to 0
[ 5.542289@0] mali-utgard d00c0000.mali: max clk set 5
[ 5.547171@0] mali-utgard d00c0000.mali: turbo clk set to 6
[ 5.552736@0] mali-utgard d00c0000.mali: default clk set to 2
[ 5.569091@3] gpu cooling register okay with err=0
[ 5.569315@3] gpu core cooling register okay with err=0
[ 5.573801@3] Mali: Mali device driver loaded
[ 5.583118@0] PPMGRVPP: info: RegisterTB_Function: gfunc (null), func: ffffffbffc04f040, ver:v2016.11.15a
[ 5.591089@0] random: init urandom read with 65 bits of entropy available
[ 5.597192@3] dig: dig start!
[ 5.614743@3] binder: 3707:3707 transaction failed 29189, size 0-0
[ 5.621883@0] amlkey_init() enter!
[ 5.624942@0] emmc_key_read:428, read ok
[ 5.624989@0] amlkey_init() storagekey_info.buffer=ffffff8001900000, storagekey_info.size = 40000!
[ 5.633042@3] logd.daemon: reinit
[ 5.633609@0] vfm_map_store:rm default
[ 5.633693@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
[ 5.633861@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[ 5.633874@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 5.633888@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[ 5.633898@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[ 5.633926@0] init: property_set("ro.radio.noril", "true" failed
[ 5.635476@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[ 5.635489@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 5.635504@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[ 5.635514@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/product_string'
[ 5.635588@0] init: property 'ro.usb.vendor.string' doesn't exist while expanding '${ro.usb.vendor.string}'
[ 5.635598@0] init: cannot expand '${ro.usb.vendor.string}' while writing to '/sys/class/android_usb/android0/f_mass_storage/vendor_string'
[ 5.635611@0] init: property 'ro.usb.product.string' doesn't exist while expanding '${ro.usb.product.string}'
[ 5.635621@0] init: cannot expand '${ro.usb.product.string}' while writing to '/sys/[ 5.786114@3] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[ 5.787832@1] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 5.787862@1] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[ 5.808180@2] init: cannot execve('/system/bin/install-recovery.sh'): No such file or directory
[ 5.842074@2] remote: cur_mode = 0
[ 5.842116@2] remote: set_remote_mode[74]
[ 5.878059@1] init: cannot find '/system/bin/tee-supplicant', disabling 'tee_supplicant'
[ 5.881183@1] android_usb: Cannot enable 'adb' (-22)
[ 5.886296@1] android_usb: Cannot enable 'adb' (-22)android_usb: Cannot enable 'adb' (-22)Hello Jten!!!
Hello Jten!!!
Hello Jten!!!
shell@p212:/ $
[ 6.342961@0] hdmitx: edid: not find mapped vic
[ 6.343001@0] hdmitx: edid: not find mapped vic
[ 6.346507@0] hdmitx: edid: not find mapped vic
[ 6.357113@0] hdmitx: edid: not find mapped vic
[ 6.357492@0] vout_serve: vmode set to 2160p60hz420
[ 6.360994@0] vout_serve: don't set the same mode as current
[ 6.454260@0] fb: afbc: 1
[ 6.454621@0] fb: Frame buffer memory assigned at
[ 6.455755@0] fb: 0, phy: 0x000000003e000000, vir:0xffffff8002400000, size=24576K
[ 6.455755@0]
[ 6.465274@0] fb: ---------------clear fb0 memory ffffff8002400000
[ 6.487926@0] fb: osd[0] canvas.idx =0x40
[ 6.487957@0] fb: osd[0] canvas.addr=0x3e000000
[ 6.498486@0] fb: osd[0] canvas.width=7680
[ 6.498531@0] fb: osd[0] canvas.height=3240
[ 6.501095@0] fb: osd[0] frame.width=1920
[ 6.505061@0] fb: osd[0] frame.height=1080
[ 6.570226@0] fb: afbc: 1
[ 6.570774@0] fb: Frame buffer memory assigned at
[ 6.571761@0] fb: 1, phy: 0x000000003f800000, vir:0xffffff8003d80000, size=1024K
[ 6.571761@0]
[ 6.581145@0] fb: fb1 open, logo index:1
[ 6.616250@3] healthd: No charger supplies found
[ 6.616298@3] healthd: No battery devices found
[ 6.781671@0] fb: osd[1] enable: 0 scale:0x0 (systemcontrol)
[ 6.781717@0] fb: osd[0] enable: 1 scale:0x10001 (systemcontrol)
[ 6.797198@0] fb: free_scale_switch to fb0, mode: 0x10001
[ 6.797495@0] vout_serve: osd0=> x:0,y:0,w:1920,h:1080
[ 6.797495@0] osd1=> x:0,y:0,w:18,h:18
[ 6.808557@3] fb: current vmode=2160p60hz420
[ 6.814011@3] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
[ 6.818038@3] fb: osd[1].scaledata: 1920 3840 1080 2160
[ 6.821991@0] fb: osd[1].pandata: 0 0 0 0
[ 8.389396@0] random: nonblocking pool is initialized
[ 9.849614@0] warning: `main' uses 32-bit capabilities (legacy support in use)
[ 11.108680@0] request_suspend_state: wakeup (3->0) at 10940264587 (2015-01-01 00:00:16.230078836 UTC)
[ 11.112242@0] request_suspend_state,164,old_sleep=0,new_state=0
[ 11.911522@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 11.913059@1] audio_dsp: last mode 0,now 0
[ 11.918793@1] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 11.922626@1] audio_dsp: last mode 0,now 0
[ 11.943952@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 11.944596@0] audio_dsp: last mode 0,now 0
[ 11.949861@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 11.954852@0] audio_dsp: last mode 0,now 0
[ 12.136817@0] tv_vout: vout [tv_set_vframe_rate_end_hint] return mode = 40, policy = 1!
[ 13.248825@3] CPU1: shutdown
[ 15.300520@2] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 15.302217@2] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 15.307734@2] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 15.313451@2] lowmemorykiller: oom_adj 4 => oom_score_adj 235
[ 15.319244@2] lowmemorykiller: oom_adj 6 => oom_score_adj 352
[ 15.324799@2] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 15.330556@2] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 15.635011@0] init: cannot find '/system/bin/preinstall.sh', disabling 'preinstall'
[ 16.242475@0] aml_wifi wifi.32: [usb_power_control] Set WiFi power down !
[ 16.243844@0] aml_wifi wifi.32: [wifi_power_ioctl] 6Set usb_sdio wifi power down!
[ 16.348490@0] libphy: patch1 link down dump phyreg
[ 16.348535@0] libphy: patch2 set driving length
[ 16.352911@0] libphy: set driving length c
[ 16.356465@0] libphy: set PLL minimum jitter
[ 16.438526@2] libphy: patch1 link down dump phyreg
[ 16.438602@2] libphy: patch2 set driving length
[ 16.442792@2] libphy: set driving length c
[ 16.446906@3] libphy: set PLL minimum jitter
[ 16.454718@0] init_dma_desc_rings: txsize 256, rxsize 256, bfsize 1536
[ 16.457030@0] (init_dma_desc_rings) dma_rx_phy=0x35b82000 dma_tx_phy=0x35b83000
[ 16.466390@0] SKB addresses:
[ 16.466390@0] skb skb data dma data
[ 18.892839@0] avc open
[ 18.892908@0] amvenc_avc check CMA pool sucess, max instance: 2.
[ 18.896292@0] allocating phys 0x36100000, size 20480k, wq:ffffffc0258fb000.
[ 18.903403@0] amvenc_avc memory config sucess, buff start:0x36100000, size is 0x1400000, wq:ffffffc0258fb000.
[ 18.913401@0] avc release, wq:ffffffc0258fb000
[ 18.917144@0] remove encode_work_queue ffffffc0258fb000 sucess, _destroy_encode_work_queue line 4285.
[ 18.932209@0] ionvid: info: ionvideo open
[ 19.128493@2] ionvid: info: ionvideo_stop_generating!!!!
[ 19.128558@2] ionvid: info: ionvideo release
[ 19.142694@2] ionvid: info: ionvideo open
[ 19.338513@2] ionvid: info: ionvideo_stop_generating!!!!
[ 19.338611@2] ionvid: info: ionvideo release
[ 19.345862@2] ionvid: info: ionvideo open
[ 19.449476@0] libphy: wol_reg12[12]==0, error
[ 19.538521@2] ionvid: info: ionvideo_stop_generating!!!!
[ 19.538626@2] ionvid: info: ionvideo release
[ 19.545306@2] ionvid: info: ionvideo open
[ 19.738513@2] ionvid: info: ionvideo_stop_generating!!!!
[ 19.738619@2] ionvid: info: ionvideo release
[ 19.748195@3] ionvid: info: ionvideo open
[ 19.938524@3] ionvid: info: ionvideo_stop_generating!!!!
[ 19.938615@3] ionvid: info: ionvideo release
[ 19.945434@3] ionvid: info: ionvideo open
[ 20.138514@3] ionvid: info: ionvideo_stop_generating!!!!
[ 20.138612@3] ionvid: info: ionvideo release
[ 20.145772@3] ionvid: info: ionvideo open
[ 20.338589@2] ionvid: info: ionvideo_stop_generating!!!!
[ 20.338709@2] ionvid: info: ionvideo release
[ 20.346228@2] ionvid: info: ionvideo open
[ 20.539103@2] ionvid: info: ionvideo_stop_generating!!!!
[ 20.539234@2] ionvid: info: ionvideo release
[ 20.548625@2] ionvid: info: ionvideo open
[ 20.748776@2] ionvid: info: ionvideo_stop_generating!!!!
[ 20.748869@2] ionvid: info: ionvideo release
[ 20.764416@3] ionvid: info: ionvideo open
[ 20.958487@3] ionvid: info: ionvideo_stop_generating!!!!
[ 20.958550@3] ionvid: info: ionvideo release
[ 21.870677@1] avc open
[ 21.870740@1] allocating phys 0x36100000, size 20480k, wq:ffffffc012367000.
[ 21.882751@1] amvenc_avc memory config sucess, buff start:0x36100000, size is 0x1400000, wq:ffffffc012367000.
[ 21.890508@1] avc release, wq:ffffffc012367000
[ 21.891541@1] remove encode_work_queue ffffffc012367000 sucess, _destroy_encode_work_queue line 4285.
[ 23.622006@3] dig: isBootCompleted:1!
[ 23.708971@3] dig: setDataRoCount count:0!
[ 23.850283@3] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.850349@3] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 23.857197@2] avc open
[ 23.857251@2] allocating phys 0x36100000, size 20480k, wq:ffffffc0258fa400.
[ 23.857258@2] amvenc_avc memory config sucess, buff start:0x36100000, size is 0x1400000, wq:ffffffc0258fa400.
[ 23.857353@2] avc release, wq:ffffffc0258fa400
[ 23.857364@2] remove encode_work_queue ffffffc0258fa400 sucess, _destroy_encode_work_queue line 4285.
[ 23.899933@3] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
[ 23.906448@2] hub 1-0:1.0: USB hub found
[ 23.906668@2] hub 1-0:1.0: 2 ports detected
[ 23.909614@2] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 23.914723@2] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 23.924928@1] hub 2-0:1.0: USB hub found
[ 23.926235@1] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 23.937923@1] file system registered
[ 23.948045@1] ffs_data_put(): freeing
[ 23.959156@1] ffs_data_put(): freeing
[ 23.959985@1] android_usb: Cannot enable 'adb' (-22)
[ 23.964107@1] android_usb: Cannot enable 'adb' (-22)android_usb: Cannot enable 'adb' (-22)
[ 24.533137@2] avc open
[ 24.533192@2] allocating phys 0x36100000, size 20480k, wq:ffffffc0258c6400.
[ 24.536946@2] amvenc_avc memory config sucess, buff start:0x36100000, size is 0x1400000, wq:ffffffc0258c6400.
[ 24.546979@2] avc release, wq:ffffffc0258c6400
[ 24.551422@2] remove encode_work_queue ffffffc0258c6400 sucess, _destroy_encode_work_queue line 4285.
[ 24.866915@0] audio_dsp: IEC958_mode_codec= 0, IEC958 type 2 CH PCM
[ 24.868038@0] audio_dsp: last mode 0,now 0
[ 29.393497@1] audio_dsp: drc high cut scale set to 100%
[ 29.394899@0] audio_dsp: drc low boost scale set to 100%
[ 29.400021@1] audio_dsp: drc mode set to LINE
